Publications

Please also see:

Gillaugh, D. L., Kaszynski, A. A., Brown, J. M., Beck, J. A., and Slater, J. C., “Mistuning Evaluation Comparison via As-Manufactured Models, Traveling Wave Excitation, and Compressor Rigs,” ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, No. GT2018-76888, 2018, p. V07CT35A039.Available from: http://dx.doi.org/10.1115/GT2018-76888.

Slater, J. C. and Tidball, M. E., “Identification of Nonlinear Constitutive Properties of Damping Coatings,” 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2018, p. 0184.

Tidball, M. E., Slater, J. C., Brown, J. M., Langley, B., and George, T. J., “Modeling and Analysis of Damping Performance of Hard Coatings in Turbomachinery,” 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2017, p. 1979.

Gillaugh, D. L., Kaszynski, A. A., Brown, J. M., Johnston, D. A., and Slater, J. C., “Accurate Strain Gage Limits Through Geometry Mistuning Modeling,” 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2017, pp. AIAA 2017–0865.Available from: https://doi.org/10.2514/6.2017-0865.

Park, S., Shin, S., Kim, Y., Matson, E. T., Lee, K., Kolodzy, P. J., Slater, J. C., Scherreik, M., Sam, M., Gallagher, J. C., Fox, B. R., and Hopmeier, M., “Combination of Radar and Audio Sensors for Identification of Rotor-Type Unmanned Aerial Vehicles (UAVs),” 2015 IEEE SENSORS - Proceedings, Busan, Korea, Republic of, 2015.Available from: http://dx.doi.org/10.1109/ICSENS.2015.7370533.

Cooley, P. E. and Slater, J. C., “Investigation of a Vibration-Based Damage Identification Technique for Breathing Fatigue Cracks,” 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2015, pp. AIAA 2015–0693.

Henry, E. B., Brown, J. M., and Slater, J. C., “A Fleet Risk Prediction Methodology for Mistuned IBRs using Geometric Mistuning Models,” 17th AIAA Non-Deterministic Approaches Conference, 2015, pp. AIAA 2015–1144.

Cooley, P. E. and Slater, J. C., “Experimental Investigation of a Perturbation Model for the Nonlinear Response of a Fatigue Cracked Beam,” 55th AIAA/ASME/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, 2014.Available from: http://dx.doi.org/10.2514/6.2014-0490.

Scott-Emuakpor, O., George, T. J., Beck, J., Schwartz, J., Holycross, C., Shen, M. H., and Slater, J., “Material Property Determination of Vibration Fatigued DMLS” and Cold-Rolled Nickel Alloys, Proceedings of the ASME Turbo Expo, Vol. 7A, International Gas Turbine Institute, Dusseldorf, Germany, 2014.Available from: http://dx.doi.org/10.1115/GT2014-26247.

Beck, J. A., Slater, J. C., Brown, J. M., and Cross, C. J., “Dynamic Response Characteristics of Dual Flow-Path Integrally Bladed Rotors,” 52nd Aerospace Sciences Meeting, 2014, pp. AIAA 2014–0098.

Scott-Emuakpor, O., Schwartz, J., George, T. J., Holycross, C., and Slater, J., “Bending Fatigue Life Comparison Between Dmls and Cold-Rolled Nickel Alloy 718,” Machinery Failure Prevention Technology (MFPT) Society Annual Conference, Virginia Beach, VA, May, 2014, pp. 20–22.

Yelamarthi, K., Slater, J., Wu, Z., and Mawasha, P. R., “Engineering Management in an Interdisciplinary Senior Design Project,” Balkan Region Conference on Engineering and Business Education, Vol. 1, De Gruyter Open, 2014, pp. 153–156.

Beck, J. A., Brown, J. M., Cross, C. J., and Slater, J. C., “Geometric Mistuning Reduced Order Models for Integrally Bladed Rotors With Mistuned Disk-Blade Boundaries,” Proceedings of the ASME Turbo Expo, Vol. 7 B, San Antonio, TX, United States, 2013.Available from: http://dx.doi.org/10.1115/GT2013-94361.

Beck, J. A., Brown, J. M., Cross, C. J., and Slater, J. C., “Component Mode Reduced Order Models for Geometric Mistuning of Integrally Bladed Rotors,” AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2013.

Cooley, P. E., Slater, J. C., and Shiryayev, O. V., “Improving Spectral Signature Profiles for Fatigue Crack Identification in Beams,” 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2013, p. 1498.

Beck, J. A., Brown, J. M., Cross, C. J., and Slater, J. C., “Probabilistic Mistuning Assessment Using Nominal and Geometry Based Mistuning Methods,” Proceedings of the ASME Turbo Expo, Vol. 7, Copenhagen, Denmark, 2012, pp. 1085 – 1097.Available from: http://dx.doi.org/10.1115/GT2012-68533.

Cooley, P. E., Slater, J. C., and Shiryayev, O. V., “Fatigue Crack Modeling and Analysis in Beams,” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA, 2012, p. 1874.

Erford, M., Henry, E., Nay, J., and Slater, J., “Analysis of a Free-Fall Ballute Vehicle,” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA, 2012, p. 1516.

Slater, J. C. and Doman, D., “Proper Modes for Modeling Flapping Dynamics of Ornithopters,” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA, 2012, p. 1981.

Shiryayev, O., Gaerke, J., Cooley, P., and Slater, J., “Application of the Campbell Diagram Concept to Identification of Fatigue Cracks in Bladed Disk Assemblies,” 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 19th AIAA/ASME/AHS Adaptive Structures Conference, 2011, p. 1938.Available from: https://doi.org/10.2514/6.2011-1938.

For more publications, please see my Curriculum Vitae.